Direct observation of ICT cations at the HTL/transparent semiconductor interface

The cation density at the interface of a transparent anode and an organic layer has been measured for several hole transport (HT) materials. The number of cations at the interface of ITO:MoO_x with rubrene, NPB, m-MTDATA and TCTA was found to range from 8 × 10¹³ to 1.5 × 10¹⁴ per cm² in freshly prepared devices. These values decreased by about 25% after one month. These cations are part of the dipole layer that results from the transfer of electrons from an organic layer, whose adiabatic ionization potential is less than the work function of the anode.     

High‐Throughput Fabrication of Au–Cu Nanoparticle Libraries by Combinatorial Sputtering in Ionic Liquids

Materials libraries of binary alloy nanoparticles (NPs) are synthesized by combinatorial co‐sputter deposition of Cu and Au into the ionic liquid (IL) 1‐butyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₁C₄im][Tf₂N]), which is contained in a micromachined cavity array substrate. The resulting NPs and NP‐suspensions are investigated by transmission electron microscopy (TEM), X‐ray diffraction (XRD), UV‐Vis measurements (UV‐Vis), and attenuated total reflection Fourier transformed infrared (ATR‐FTIR) spectroscopy. Whereas the NPs can be directly observed in the IL using TEM, for XRD measurements the NP concentration is too low to lead to satisfactory results. Thus, a new NP isolation process involving capping agents is developed which enables separation of NPs from the IL without changing their size, morphology, composition, and state of aggregation. The results of the NP characterization show that next to the unary Cu and Au NPs, both stoichiometric and non‐stoichiometric Cu–Au NPs smaller than 7 nm can be readily obtained. Whereas the size and shape of the alloy NPs change with alloy composition, for a fixed composition the NPs have a small size distribution. The measured lattice constants of all capped NPs show unexpected increased values, which could be related to the NP/surfactant interactions.     

Integration von Energiemarkt und Verteilnetzbetrieb durch einen Flexibility Operator

The growing share of volatile distributed generation in the electric power grids results in increased local network utilisation and challenges the conventional strategies for maintaining the system balance. While grid extensions and smart grid solutions are considered for network utilisation issues, new market mechanisms are in focus for the balancing challenge. It can be expected that distributed generators on one hand will be able to supply only part of their available power to the grid in peak times, and on the other hand will have (potentially changing) contracts with different trans-regional virtual power plants. Against this background it will be necessary to define rules dealing with expected network access conflicts. One strategy also followed in this work is to find market mechanisms that support economically efficient network extension. Such mechanisms will have to include local flexibility markets that allow for compensating network bottlenecks. This work proposes strategies and technical interfaces for coordinating market and grid operation by means of a “Flexibility Operator”. Its integration into a holistic smart grid concept is discussed.     

Properties of anodic oxides grown on a hafnium–tantalum–titanium thin film library

A ternary thin film combinatorial materials library of the valve metal system Hf–Ta–Ti obtained by co-sputtering was studied. The microstructural and crystallographic analysis of the obtained compositions revealed a crystalline and textured surface, with the exception of compositions with Ta concentration above 48 at.% which are amorphous and show a flat surface. Electrochemical anodization of the composition spread thin films was used for analysing the growth of the mixed surface oxides. Oxide formation factors, obtained from the potentiodynamic anodization curves, as well as the dielectric constants and electrical resistances, obtained from electrochemical impedance spectroscopy, were mapped along two dimensions of the library using a scanning droplet cell microscope. The semiconducting properties of the anodic oxides were mapped using Mott–Schottky analysis. The degree of oxide mixing was analysed qualitatively using x-ray photoelectron spectroscopy depth profiling. A quantitative analysis of the surface oxides was performed and correlated to the as-deposited metal thin film compositions. In the concurrent transport of the three metal cations during oxide growth a clear speed order of Ti > Hf > Ta was proven.     

Iterative algorithm for optimal fiducials under weak perspective projection

In previous work, we designed space fiducials with the aim of making camera pose determination as noise‐insensitive as possible. These fiducials turned out to be sets of points that formed concentric regular polyhedra. Here, we apply an idea of Dementhon and Davis and test and analyze an iterative linear algorithm in conjunction with our optimal fiducials to increase the accuracy of the computed camera pose. We also analyze under what circumstances this iterative algorithm is guaranteed to converge to the correct solution. Comprehensive computer simulations illustrate the behavior of the algorithm and the degree of improvement in pose determination in case of convergence. © 2009 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 19, 27–36, 2009     

Selective oxidation of alcohols by combinatorial catalysis

High-throughput synthesis and screening of polyoxometalate (POM) and supported-metal libraries have been developed for the selective aerobic oxidation of alcohols to the corresponding aldehydes/ketones in the liquid phase. Libraries consisting of 96 catalysts were prepared in multi-well reactors and screened for catalytic activity using TLC, GC and NMR detection methods. Promising hits identified in the high-throughput primary screens were successfully scaled up and optimized in conventional laboratory test units. Isolated yields confirm high selectivities of more than 90% with quantitative conversions. Substrates tested include primary and secondary alcohols. Specific results will be presented for hydroxymethyl-substituted heterocycles and bicyclo-octanols.     

Validation of scales measuring attitudes, self-efficacy, and intention related to smoking among middle school students.

Attitudes toward smoking, self-efficacy to avoid smoking, and smoking intention, widely cited correlates of youth smoking prevention, are often measured in large-scale youth tobacco surveys. The psychometric properties of these scales have not been well studied among middle school youth. We examined the factorial, discriminate, and convergent validity of these scales among sixth to eighth graders from a convenience sample of 22 Texas middle schools (51.2% female; 51.21% White, 32.1% Hispanic, 16.9% African American, and 8.8% Other; 67.8% nonsmokers, 21.9% experimental smokers; 3.3% former smokers; and 7.6% current smokers). Confirmatory factor analysis and invariance testing suggest that smoking attitudes, self-efficacy, and intention have evidence of construct validity in this multiethnic sample, and the scales are appropriate to assess these constructs among middle school adolescents. Additional studies are needed to establish additional evidence of validity of these constructs in other middle school samples and other subgroups (e.g. current, experimental, and former smokers). (PsycINFO Database Record (c) 2010 APA, all rights reserved)